继电保护中多路模拟量采集系统的设计

介绍了一种基于高性能浮点DSP芯片TMS320C32、CPLD芯片XC95288和A/D采样芯片AD976组成的多路采集系统的工作原理以及设计方法。通过对第一路施加特殊的电压量,在CCS开发环境下读取采样缓冲区的值,并利用Matlab对采样数据进行了全波傅氏变换。此外,该系统已在继电保护中得到广泛应用,实践表明,该系统能较好地解决多路模拟量的采集,并确保了采样数据的安全可靠性。     

Evaluation of the intergranular corrosion in austenitic stainless steel using collinear wave mixing method

Failures due to intergranular corrosion in components of austenitic stainless steel have always been a tough problem in engineering practice. In this paper, the collinear wave mixing was investigated to evaluate the intergranular corrosion in austenitic stainless steel. An acoustic nonlinearity parameter related to the bispectrum, the propagation distance and the amplitudes of fundamental waves in measured signal is proposed. Nonlinear acoustic measurements were conducted on four tubes with different degree of intergranular corrosion. The experimental results demonstrated that the proposed acoustic nonlinearity parameter is sensitive to intergranular corrosion in samples, and is well correlated with the degree of damage.     

直纺亮光抗倒伏波浪扁平涤纶FDY的开发

探讨了直纺83 dtex/114 f波浪扁平涤纶全拉伸丝(FDY)的工艺制备过程。试验证明,在熔体输送温度276~282℃,纺丝温度286~290℃,喷丝板规格DIO φ104 mm-114孔、"王"字形,环吹风压10~15 Pa,含油率1.1%~1.2%,卷绕速度3 800~4 200 m/min的工艺参数下纺制83 dtex/114 f波浪扁平涤纶FDY时,生产稳定,满卷率高,外观情况良好,袜带均匀亮丽,可批量生产。此新产品可用于制作高档布艺沙发表层面料,具有抗倒伏、色彩艳丽等功效。     

Effects of high-intensity ultrasound treatment on physiochemical properties of caseins-cyanidin-3-galactoside conjugates

The application of protein-polyphenol complexes is increasing and broadening in recent years. Due to their unique properties, these complexes are attracting increased research interest. In this study, the cyanidin-3-galactoside was grafted to the caseins using free radicles induced by ultrasound. The formation of conjugation between caseins and cyanidin-3-galactoside was confirmed by the decrease in free amino groups and sulfhydryl content. Conjugation with cyanidin-3-galactoside resulted in aggregation of caseins, which also led to increase in particle size, relative fluorescence intensity and random coil. Conjugation also disrupted the hydrogen bonds and decreased the electrostatic repulsion and hydrophobic interactions between caseins. The caseins-cyanidin-3-galactoside conjugate had better emulsifying, gelation properties and lower thermal stability than that of caseins.     

Strategies to improve the nutritional value of meat products: incorporation of bioactive compounds,reduction or elimination of harmful components and alternative technologies

Meat is an excellent source of protein with a good balance of amino acids. It is also rich in several minerals, vitamins and bioactive compounds, which play important roles in metabolism and are easily assimilated from meat compared with other foods. The nutritional value of meat is one of the factors that influence consumer acceptance. However, it can be significantly reduced during processing. Moreover, some operations, such as curing, smoking or fermentation, used for processing can lead to the formation of harmful components in meat, and hence, nutritionists associate high consumption of processed meat with an increased risk of several diseases such as cardiovascular disorders and cancers. This review deals with the distinctive aspects of the technological strategies that can be used to improve the nutritional value of meat products, including the incorporation of bioactive components, reduction or elimination of harmful components (e.g. nitrite/nitrate, fat) and alternative technologies (ultrasound).     

聚能式逆流超声强化制备脂肪酸乙酯工艺研究

以大豆油脱臭馏出物为原料,通过聚能式逆流超声强化与乙醇反应制备脂肪酸乙酯。分析醇油体积比、反应温度、超声功率、催化剂用量和反应时间对脂肪酸乙酯转化率、得率、含量和生物柴油转化率的影响。通过正交实验优化得到:脂肪酸乙酯转化率最优工艺条件为醇油体积比20∶1,反应温度35℃,超声功率300 W,催化剂用量1.6%,反应时间30 min;脂肪酸乙酯得率最优工艺条件为醇油体积比30∶1,反应温度40℃,超声功率600 W,催化剂用量1%,反应时间30 min;脂肪酸乙酯含量最优工艺条件为醇油体积比20∶1,反应温度40℃,超声功率600 W,催化剂用量1%,反应时间60 min;生物柴油转化率最优工艺条件为醇油体积比25∶1,反应温度35℃,超声功率500 W,催化剂用量1%,反应时间30 min。     

Current Control Method of Achieving Wide‐Range Power Driving for Linear Synchronous Motor with Half‐Wave‐Rectified Self‐Excitation

In a previous paper, we proposed a novel linear synchronous motor with half‐wave‐rectified self‐excitation. A long‐stator‐type linear synchronous motor was built and its performance was verified by experiments. This paper presents a new current control method for the linear synchronous motor in order to achieve a wide range of speeds and high‐power operations. First, we propose a current control method for high‐thrust operation in the constant‐thrust region. This operation is realized by using the reluctance thrust resulting from the saliency of the linear synchronous motor. We also propose a control method that maximizes the ratio of the thrust to the voltage; this method can be used to expand the operating range. Wide‐range‐speed operation can be achieved by applying this new control method along with field‐weakening control. The thrust and operating characteristics of the proposed control methods are estimated by performing experiments and coupled electric and magnetic analysis.     

Numerical investigation of mass flow rate effects on multiplicity of detonation waves within a H2/Air rotating detonation combustor

This paper presents results from numerical simulations of a non-premixed hydrogen-air rotating detonation combustor with radial injection. The fuel and air mass flow rate are varied in order to hold a unity global equivalence ratio. The calculations show that multiple detonation waves co-exist when the mass flow rate is increased. Conditional statistics of the detonation structure and combustion processes suggest similarities across co-existing waves. Quantification of the injection response to the rotation of a detonation indicates that at higher flow rate the refill time is short enough to allow for a quick and well mixed composition prior to the new front passage. Details of the combustion characteristics are analyzed. The results elucidate the correlation between initial injection conditions and detonation multiplicity on the overall physics within the combustor.     

Enhanced microwave absorbance of oxidized SiCf/AlPO4 composites via the formation of a carbon layer on the SiC fibre surface

A single-layer radar-absorbing structure active in the X-band (8.2?GHz to 12.4?GHz) was demonstrated by blending SiC fibres with an AlPO₄ matrix material. The as-prepared SiC_f/AlPO₄ composites were oxidized at 1273?K for several hours to investigate the effects of oxidation on the dielectric and wave-absorbing properties. Scanning and transmission electron microscopy were used to characterize the morphology and microstructure of the composites. The AlPO₄-SiO₂ solid solution during oxidation promoted the formation of a complete carbon layer on the SiC fibre surface. The real and imaginary parts of the SiC_f/AlPO₄ composites increased from 4.2–4.4 to 5.9–7.1 and from 0.08–0.2 to 3.9–5.2, respectively, with increasing oxidation time from 0 to 10?h, respectively. When the thickness of the composites increased from 2.9?mm to 3.3?mm, the wave-absorbing property noticeably improved due to the formation of a carbon layer on the SiC fibre surface after oxidation.     

Li2AGeO4 (A = Zn,Mg): Two novel low-permittivity microwave dielectric ceramics with olivine structure

Two low-permittivity dielectric materials Li₂AGeO₄ (A?=?Zn, Mg) were prepared via the solid-state reaction method. X-ray diffraction analysis and Rietveld refinement indicated that both ceramics crystallize in an orthorhombic olivine structure with a space group Pmn2₁. Dense ceramics with high relative density and homogeneous microstructure were obtained. Li₂ZnGeO₄ densified at 1200?°C possessed a relative permittivity ε_r?=?6.5, a quality factor Q?×?f?=?35,400?GHz, and a temperature coefficient of resonant frequency. Li₂MgGeO₄ exhibited ε_r?=?6.1, Q?×?f?=?28,500?GHz, and τ_f?=?–74.7?ppm/°C when sintered at 1220?°C. Additionally, the large negative τ_f values of Li₂AGeO₄ (A?=?Zn, Mg) ceramics were successfully adjusted compensated by forming composite ceramics with CaTiO₃ and near-zero τ_f values of +2.9?ppm/°C and +5.8?ppm/°C were achieved in 0.92Li₂ZnGeO₄-0.08CaTiO₃ and 0.90Li₂MgGeO₄-0.10CaTiO₃, respectively.